20+ Diy String Light Pole Planter. I absolutely love how this string light pole planter project turned out. With all the slats attached, i realized that the top edge of the planter looked a little sloppy.
The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for. A 1×3 was essentially the perfect size for a top edge, so back to. Add concrete mix + water.
String Light Planter Pole Supplies.
I attached the flange on the bottom to a scrap piece of wood with deck screws and set it in the planter. 4 panels measuring 16″ x 16″ for each planter. I absolutely love how this string light pole planter project turned out.
The Only Problem Is That You Need Something To Hang The String.
You can use the following tutorial with store bought or diy planter pots. Mix & pour concrete into the planter. How to make planter posts for string lights step 1:
Add Concrete Mix + Water.
Diy planter with pole for string lights. With all the slats attached, i realized that the top edge of the planter looked a little sloppy. Drill and screw driver or.
Our Pots Measure 20 Inches High, With A 15 Inch Opening.
Scrap wood helps to stabilize the poles before. String lights are an inexpensive way to add lighting to an outdoor patio. These will serve as the main frame of the planter box.
Quick And Easy Guide For How To Build Planter Barrel Posts For String Lights Using Some Scrap Wood, A 4X4 Post, Concrete And A Plastic Whiskey Barrel.
Combine all the ingredients in a large plastic work bucket and follow the directions on the bag. The concrete should fill about 1/2 to 3/4 of the barrel to provide enough stability for. I really enjoy the ambiance of having the backyard lit up with string.